Linux CNC control.

Alex Fraser beatnic@comcast.net
Mon, 30 Dec 2002 14:37:48 -0500 

--Boundary_(ID_GC6b8zFLnDetdOccTbPDWw)
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT

There is an interesting series starting in the Home Shop Machinist
magazine. From that I found this site. I have cross posted this on a
couple of lists as it has a certain techie appeal.

http://www.yty.net/cnc/  This guy is a ham.

and this site for free government controller code

 http://www.yty.net/cnc/bdi.html  Runs with Real Time Linux

--
>>>>>>>>>>>>>>>>----<<<<<<<<<<<<<<<<<
........ Alex Fraser  N3DER .........
......... beatnic@comcast.net .......
[~]_>^</\-[~]_>^</\-[~]_>^</\-[~]_>^<


--Boundary_(ID_GC6b8zFLnDetdOccTbPDWw)
Content-type: text/html; charset=us-ascii
Content-transfer-encoding: 7BIT

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
There is an interesting series starting in the Home Shop Machinist magazine.
>From that I found this site. I have cross posted this on a couple of lists
as it has a certain techie appeal.<a href="http://www.yty.net/cnc/"></a>
<p><a href="http://www.yty.net/cnc/">http://www.yty.net/cnc/</a>&nbsp;
This guy is a ham.
<p>and this site for free government controller code
<p>&nbsp;<a href="http://www.yty.net/cnc/bdi.html">http://www.yty.net/cnc/bdi.html</a>&nbsp;
Runs with Real Time Linux
<p>--
<br>>>>>>>>>>>>>>>>>----&lt;&lt;&lt;&lt;&lt;&lt;&lt;&lt;&lt;&lt;&lt;&lt;&lt;&lt;&lt;&lt;&lt;
<br>........ Alex Fraser&nbsp; N3DER .........
<br>......... beatnic@comcast.net .......
<br>[~]_>^&lt;/\-[~]_>^&lt;/\-[~]_>^&lt;/\-[~]_>^&lt;
<br>&nbsp;</html>

--Boundary_(ID_GC6b8zFLnDetdOccTbPDWw)--