Fwd: [digitalvoice] codec2 gmsk modem installation guide for rasberry pi

[Alex Fraser]

Borg radio marches on!

-------- Original Message --------

Hi all,



I have just put the installation guide for the c2gmsk VHF/UHF modem  for
codec2 on raspberry pi online.

https://github.com/on1arf/gmsk/wiki/Installation-procedure-for-the-c2gmsk-modem-on-raspberry-pi

Using a raspberry pi, two USB audio fobs, a radio capable of "9k6"
packet and a very small interface board, it is now possible to
experiment with 10 meter / VHF / UHF digital voice using the codec2
protocol.



As an experiment, I've put it on github as a wiki page; which means that
every can edit / append it. If you have any information that you feel
should also be in the document, feel free to edit the document.

Additional documents will be added later:
-  USB audio-fobs that are known to work well
-  GPIO input for trigger transmission



73
Kristoff - ON1ARF

-- 
You received this message because you are subscribed to the Google Groups "digitalvoice" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digitalvoice+unsubscribe at googlegroups.com.
To post to this group, send email to digitalvoice at googlegroups.com.
Visit this group at http://groups.google.com/group/digitalvoice?hl=en-US.
For more options, visit https://groups.google.com/groups/opt_out.