<div dir="ltr"><div><br>> Date: Thu, 31 Dec 2015 20:25:29 -0500<br>> From: "Terry N4TLF" <n4tlf@...><br>><br>> The QRP Tech Yahoo group has discussed using laser printers to print out the <br>> PC board traces, then use irons or laminators to transfer that to a pc board. <br>> Then you use the chemicals to etch like normal.  I really don’t want to play with <br>> chemicals.<br><br></div>I have been thinking about that approach while reading this thread. It has been a long time (30 years?) since I did that so I don't remember all the details. I recall printing on one particular side of a clear plastic sheet which I seem to remember had a coating to release the toner more easily and consistently. I think there was an acid etchent, a neutralizer, and a cleaner. The hardest part was drilling for through hole parts. <br><div><br></div><div>73 es sail fast de dave KO4MI<br></div><div><br>--<br>sail fast and eat well, dave<br>Dave Skolnick S/V Auspicious<br>443-327-9084</div></div>