<div dir="auto">Thanks Martin, it would be nice to do that. I recently accidentally discovered and broadcast a Reddit r/shortcircuit video stream of the fpga testbed so, that system has great capability like live comments and stuff. But it does take a monitor and a dedicated setup. Have you the time to explore Reddit RPAN streams ?<div dir="auto"><br></div><div dir="auto">Michael Chisena and I have talked a lot of about streaming instructional electronics over thr new fangled systems... and I also want to ask of anyone else is interested? Then it could be a nice system to make if we used the OBS system ro switch video streams of the presenters from time to time into a zoom channel to support a group learning pathway .</div><div dir="auto"><br></div><div dir="auto">Zoom also works and I have a few cameras that can be switched (selected) on demand. <br></div><div dir="auto"><br></div><div dir="auto">But if group teaching is not required. I can and want to start collaboration in a technical education group towards homebrew digital and analog systems. </div><div dir="auto"><br></div><div dir="auto">You may have noticed the booboo created at ORI, they just find out that their matlab code can't be ported to HDL without the extensive HDL converter license. Surprising they didn't know this earlier and stay away from that pathway. They just put out an email on this. </div><div dir="auto"><br></div><div dir="auto">It is absolutely possible to write communication modulation and demodulation code as RTL and C/C++ (however ineffcient) without matlab! Even BASIC could be used to do a BPSK chain but of course the issues are with the matlab handy filters... I think. </div><div dir="auto"><br></div><div dir="auto">So should we not try to learn about this stuff all together?<br><div dir="auto"><br></div><div dir="auto"><br></div></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Jan 9, 2022, 00:42 Martin <<a href="mailto:dcmk1mr2@gmail.com">dcmk1mr2@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hi All & Happy New Year!<br><br><div>Have you considered the ADALM-PLUTO? $229 from Digikey, 7010 (vs 7007), ships today, has more interesting stuff and can be reloaded with original software if SDR is needed. I know it's not a dev board but people do tack leads to spare GPIO pins.<br><br>@Samudra, would you like to teach a little about FPGAs? There is interest with the 50 MHz and Up club in Sunnyvale. I'm too rusty to lead and it's not a bad commute over Zoom. <br><br></div><div>73 Martin W6MRR</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sat, Jan 8, 2022 at 9:10 PM Samudra Haque <<a href="mailto:samudra.haque@gmail.com" target="_blank" rel="noreferrer">samudra.haque@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto">So it may be possible to post this project to Avnet Minized which is also zynq 7010s based </div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Jan 9, 2022, 00:04 Terry Fox <<a href="mailto:tfox@knology.net" target="_blank" rel="noreferrer">tfox@knology.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div>
<p>Regarding today's discussion on tacos about FPGAs, this
(Blackboard) looks rather interesting. It's not costly, and has
some neat peripherals.</p>
<p><a href="https://www.hackster.io/adam-taylor/real-digital-signal-processing-0bea44?mc_cid=b16a7a12ba&mc_eid=65c2c46a0c" rel="noreferrer noreferrer" target="_blank">Real
Digital Signal Processing - Hackster.io</a></p>
<p><a href="https://www.realdigital.org/" rel="noreferrer noreferrer" target="_blank">Welcome to Real Digital</a></p>
<p><br>
</p>
</div>
_______________________________________________<br>
Tacos mailing list<br>
<a href="mailto:Tacos@amrad.org" rel="noreferrer noreferrer" target="_blank">Tacos@amrad.org</a><br>
<a href="https://lists.amrad.org/mailman/listinfo/tacos" rel="noreferrer noreferrer noreferrer" target="_blank">https://lists.amrad.org/mailman/listinfo/tacos</a><br>
</blockquote></div>
_______________________________________________<br>
Tacos mailing list<br>
<a href="mailto:Tacos@amrad.org" target="_blank" rel="noreferrer">Tacos@amrad.org</a><br>
<a href="https://lists.amrad.org/mailman/listinfo/tacos" rel="noreferrer noreferrer" target="_blank">https://lists.amrad.org/mailman/listinfo/tacos</a><br>
</blockquote></div>
</blockquote></div>