Introducing Jason - and asking for cooperation]

[Andre Kesteloot]

Alberto di Bene wrote:

> Hello group,
>
>    I have devised a novel coding scheme, and have written a new
> software to support it.
>
> I have named it Jason, from the name of the coxswain of the mythological
> ship Argo, which was headed to Colchis by the Greek hero Jason.
>
> The coding scheme of Jason is based on the ideas about IFK that can be found
> on the Web site of Steve Olney, VK2ZTO.
>
> I need your cooperation to test it. I have done some preliminary tests, which
> have given very good results, but a true test on the LF hasn't been performed
> yet.  Instead of cluttering this reflector with the gory technical details of Jason,
> I invite you to visit this page :  http://www.weaksignals.com/jason
>
> You can use Jason with a mosfet Class-D Tx, no need for a linear amp.
> You can drive the Tx either using a DDS board connected via the parallel port or
> the serial port, or up converting an audio signal generated by Jason.
>
> I tested only the audio interfacing. I need someone who volunteers for testing
> the interfacing via the DDS board (I haven't one), with true on-the-air tests.
>
> Thanks for any cooperation
>
> 73  Alberto  I2PHD