[Fwd: LF: Again on the E - Field Antenna.]

Sun, 15 Sep 2002 17:37:53 -0400

--------------799326295CFD576F09415A18
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Giulio Scaroni wrote:

> Hi to all,i have received by Crystalonics the CP666 High Performance
> FET for the AMRAD E Field Antenna, so in this weekend i have realized
> it.The first impression is that i can't believe that with a 1 meters
> long whip was possible listen from the DC to up 30 MHZ, an outstanding
> design!!!!!!Compared here with my big magnetic loop in 160/80/40 ( 4
> meters dia.) is about the same, a little better is the magloop for
> high angle, on higher band is really better than my little magloop on
> the DX.In LF i can hear signal from 12 Khz, where i listen Omega and
> Alpha also signal i think, in 136 this morning i have recorded I5TGC
> with DF6NM in dfcw, with Amrad antenna DF6NM was T/O, with my ferrite
> antenna with fet pre nothing!!The 2 antenna are at about 8 meters high
> on my roof at a distance one from the other about 10 meters, so for my
> first impression is the antenna work very well, and the Crystalonics
> fet is really very good, no presence of intermodulation at the output
> of the pre with my EKD300 receiver, while with my IC738, there is some
> IMD on 160, the limiting factor is the receiver!!!!So, i agree at 100%
> with all the impression wrote by Derek Atter, G3GRO about this
> antenna.Again, the ferrite antenna is much vulnerable with magnetic
> man made signal, local signal very high on the ferrite disappear on
> the vertical whip, incredible.I have ordered 15 pieces of this FET, 10
> are for I2PHD Alberto, may be that him want to made a 136 khz four
> square array??? hi hi hi.73 to all the IK2DED Giulio Scaroni. Ahh,
> without a good ground connection near the whip the antenna is so noisy
> that a piece of random wire in the shack is better!!

--------------799326295CFD576F09415A18
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<body bgcolor="#FFFFFF">
Giulio Scaroni wrote:
<blockquote TYPE=CITE><style></style>
Hi to all,i
have received by Crystalonics the CP666 High Performance FET for the AMRAD
E Field Antenna, so in this weekend i have realized it.The
first impression is that i can't believe that with a 1 meters long whip
was possible listen from the DC to up 30 MHZ, an outstanding design!!!!!!Compared
here with my big magnetic loop in 160/80/40 ( 4 meters dia.) is about the
same, a little better is the magloop for high angle, on higher band is
really better than my little magloop on the DX.In
LF i can hear signal from 12 Khz, where i listen Omega and Alpha also signal
i think, in 136 this morning i have recorded I5TGC with DF6NM in dfcw,
with Amrad antenna DF6NM was T/O, with my ferrite antenna with fet pre
nothing!!The 2 antenna are at about 8 meters high
on my roof at a distance one from the other about 10 meters, so for my
first impression is the antenna work very well, and the Crystalonics fet
is really very good, no presence of intermodulation at the output of the
pre with my EKD300 receiver, while with my IC738, there is some IMD on
160, the limiting factor is the receiver!!!!So, i
agree at 100% with all the impression wrote by Derek Atter, G3GRO about
this antenna.Again, the ferrite antenna is much vulnerable
with magnetic man made signal, local signal very high on the ferrite disappear
on the vertical whip, incredible.I have ordered 15
pieces of this FET, 10 are for I2PHD Alberto, may be that him want to made
a 136 khz four square array??? hi hi hi.73 to all
the IK2DED Giulio Scaroni.&nbsp;Ahh, without a good
ground connection near the whip the antenna is so noisy that a piece of
random wire in the shack is better!!</blockquote>

<br>&nbsp;
<br>&nbsp;
</body>
</html>

--------------799326295CFD576F09415A18--