Warning: this is not about Ham Radio

[Andre Kesteloot]

On 5/6/2012 23:45 PM, Robert E. Seastrom wrote:
> [...]
> but one would at least *hope* that internal training for a counter guy
> at a place that sells drills and taps would include the notion that
> the 3/8" drill and the 3/8" tap don't go together and there's a chart
> that one consults to get the cross reference right.
see for instance:

http://www.modelfixings.co.uk/drill_bits.htm

which I discovered while in the UK.

73
André