Need an "Audible Frequency Announcement Feature"

[3t3]

TO: Anyone at AMRAD interested in helping Danny Dyer (WB4IDU):

Danny is looking for a way to get an "audible frequency announcement 
feature" added to a Kenwood TS-140 transceiver for a blind ham.

His original request for help follows:
xxxxxxxxxxxxxxxxx
Is there A place Anywhere in either the RX or Oscillator chain, to tap 
and read-out, Somewhere on the TS140, with a either a FreqMite, or 
Stinger Singer, so as to be able to read the tuned frequency, or a 
useable multiple there of, so that a blind OP, can determine received freq?

I realize that, if necessary, a lower power xmit read out is doable, but 
somewhere in the RX chain would obviously be better !  Any suggestions 
are welcome !

Your forwarding this to any lists you're part of which might be helpful 
is fine as well !

To All On These Lists, For All You Are And All You Do,

Many Thanks From,
And Please Reply Direct To,
Danny Dyer, Wb4idu
ddyer1 at gmail.com
xxxxxxxxxxxxxxxxx


-- 
     Terry McCarty
    3t3 at comcast.net
        wa5nti

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://amrad.org/pipermail/tacos/attachments/20121215/408fd839/attachment.html>