wish to combine VHF rf tx signals into one antenna

[Samudra Haque]

Hi, this might be odd. At K3GWU, as we catalog all donated equipment, I
have (now) several VHF radios. Some are portable (1-5W), others fixed, low
power (10W), medium power (30W), high power (>60W)

Is there a practical way to combine these into one antenna? or should I use
different antennas?

I am seeking to minimize cabling from 3rd floor to rooftop (+2 floors), and
to allow the station to be constantly in service with voice to any repeater
network in line of sight with Foggy Bottom, and some experimental support
in VHF band with digital modes.

Ideas would be appreciated. I noticed the availability of diplexers, but
they are not usually VHF1, VHF2 VHF3 > common outputs.

I do have a V2000A diamond triple band antenna (6M/2M/70CM) and a separate
KA2ZEV 2M antenna now that I could use....

73 de N3RDX
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://amrad.org/pipermail/tacos/attachments/20130529/afb82f6d/attachment.html>