AMRAD Active LF Antenna

[fgentges at mindspring.com]

Mark,

The board is correct.  The schematic in QST is missing a dot at the 
crossing of the two lines.  The bottom of C2, R3. C3, C4 and R5 should 
all connect to ground.  I hope this answers your question.  If not, 
please post again.  See attached FAQ for some other good tips.

Frank K0BRA

On 10/12/2014 05:14 PM, Mark Fancher wrote:
> Well in that case, I’m building it using the FAR boards.  My antenna
> board doesn’t seem to match the schematic in QST from 9/01.  Was there a
> flaw in the board?  Maybe it was corrected, but I got an older one?
>
> My power supply is A-OK.
>
> Mark, AA4MF
>
> *From:*tacos-bounces+mark.fancher=twc.com at amrad.org
> [mailto:tacos-bounces+mark.fancher=twc.com at amrad.org] *On Behalf Of
> *William Fenn
> *Sent:* Sunday, October 12, 2014 4:58 PM
> *To:* TACOS
> *Subject:* FW: AMRAD Active LF Antenna
>
> Sure would be the right spot.
>
> *From:* tacos-bounces+wfenn4=verizon.net at amrad.org
> <mailto:tacos-bounces+wfenn4=verizon.net at amrad.org>
> [mailto:tacos-bounces+wfenn4=verizon.net at amrad.org] *On Behalf Of *Mark
> Fancher
> *Sent:* Sunday, October 12, 2014 4:53 PM
> *To:* Tacos at amrad.org <mailto:Tacos at amrad.org>
> *Subject:* AMRAD Active LF Antenna
>
> I’m building subject project and have a question.  Would this be the
> proper place to pose it?
>
> Mark, AA4MF
>
>
>
> _______________________________________________
> Tacos mailing list
> Tacos at amrad.org
> https://amrad.org/mailman/listinfo/tacos
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: faq.pdf
Type: application/pdf
Size: 18854 bytes
Desc: not available
URL: <http://amrad.org/pipermail/tacos/attachments/20141012/0ed5420b/attachment-0001.pdf>