Is a 250V fuse appropriate for a 115V AC IEC320 connector?

[samudra.haque at gmail.com]

Requesting project design tips.

 

I'm designing a box that will be AC powered. I like an on/off switch, fuses,
lights to indicate the box has power. 

 

I wanted to use something like shown here
<https://www.ebay.com/itm/MZ-3Pin-IEC320-C14-Inlet-Module-Plug-Fuse-Switch-M
ale-Power-Socket-10A-250V-SZHK/173233630121?epid=1221772557&hash=item2855876
ba9:g:RMUAAOSwaEhZGxA0> .

 

The requirement for 250V fuse is embossed in the plastic. In north America,
115V is the pole-neutral house voltage for residential circuits. Is 250V
here correct, or should we fit with another fuse voltage? Essentially the
first device after this receptacle is a switched mode power supply. 

 

73, N3RDX

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.amrad.org/pipermail/tacos/attachments/20180427/6a533909/attachment.html>