anyone with a entry level FPGA development board (VHDL support) they don't need?

Fri Mar 13 20:42:33 EDT 2020

Hi Martin, thanks for the tip. I went looking for the board you recommended from Lattice (it’s offered at a good price) but if I am not mistaken, it doesn’t have any peripherals such as switches  for onboard experiments? The photos show it comes with LEDs, but no switches.

Then I went looking for the icestorm documentation and it seems they ship from UK (the blackice boards) so despite those development boards being chock full of accessories for experimentation, the shipping delay and cost sort of makes it expensive.

So, randomly I searched and came across (comments requested) for about $43.85 total with shipping:

https://www.ebay.com/itm/STEP-MAX10-Intel-Altera-FPGA-development-board/143318504573?hash=item215e72d47d%3Ag%3AlcQAAOSwARpdGDCw <https://www.ebay.com/itm/STEP-MAX10-Intel-Altera-FPGA-development-board/143318504573?hash=item215e72d47d%3Ag%3AlcQAAOSwARpdGDCw&LH_BO=1> &LH_BO=1

and according to the website http://www.stepfpga.org/step-max10-development-board/  it is fully supported by:

Altera MAX10 FPGA: 10M02/10M08

On board USB Blaster programming circuit

2-character 7-segment display

Two RGB LEDs

Four switches

Four push buttons

Eight user LEDs

Power from MicroUSB connector

40 pins DIP connector with 36 User I/Os

*         <https://github.com/stepfpga/STEP-MAX10/blob/master/docs/STEP-MAX10%20Hardware%20Manual%201.0.pdf> STEP-MAX10 Hardware Manual 1.0

*         <https://github.com/stepfpga/STEP-MAX10/blob/master/docs/STEP-MAX10%20Software%20Manual%201.0.pdf> STEP-MAX10 Software Manual 1.0

*         <https://pan.baidu.com/s/1guMNzIYx2Q4sUGhQ1pSUvg> STEP-MAX10 Source Code

*         <https://github.com/stepfpga/STEP-MAX10/blob/master/docs/STEP-MAX10%20Schematic.pdf> STEP-MAX10 Schematic diagram

*         <http://fpgasoftware.intel.com/?edition=pro> Software&Tools

The software suite is … Altera (Microsoft) Quartus Prime Lite, which includes ModelSim for soft logic analyzer waveform output … and supports Verilog and VHDL. I think that could be ok for mid-level developers, right?

But since the documentation says “On board JTAG programming circuit”, is an actual JTAG gadget still necessary for this device, or is that functionality already included somehow?

From: Martin <dcmk1mr2 at gmail.com> 
Sent: Friday, March 13, 2020 7:26 PM
To: Samudra Haque <samudra.haque at gmail.com>
Cc: Tacos <tacos at amrad.org>
Subject: Re: anyone with a entry level FPGA development board (VHDL support) they don't need?

You might want to take a look at  https://www.amazon.com/LATTICE-SEMICONDUCTOR-ICE40HX1K-STICK-EVN-Evaluation-iCE40HX1K/dp/B00R3QU9K0  for a board and do a google search for Windows iceStorm support.  The are more expensive FPGAs from Intel/Altera amd Xilinx but the tool chains are awful.

You also might want to check to see if you really want to invest in VHDL or if Verilog might be better for your needs.  It doesn't hurt to know both but Verilog is more like C and is less trouble to learn.

Learning to simulate is a really import skill for FPGA development so you can get started with that before you have hardware.

73 Martin W6MRR

On Fri, Mar 13, 2020 at 3:50 PM <samudra.haque at gmail.com <mailto:samudra.haque at gmail.com> > wrote:

I would like to do an experiment with an FPGA development board. I’m looking for something with pinouts or with a switch + LED; My experience with VHDL is very limited. I will be using Windows 10 for my development environment. 

If anyone has a board they don’t need, would you be willing to sell it at a Tippy’s Taco’s meetup to me? Send me the product manufacturer part number and your ask to samudra.haque at gmail.com <mailto:samudra.haque at gmail.com> . 

Also, if I had no FPGA board, is there a emulator environment that I can compile the code and get a testbench / diagram of the signals? At least I could begin coding / developing the framework right away.

73 de Samudra N3RDX

_______________________________________________
Tacos mailing list
Tacos at amrad.org <mailto:Tacos at amrad.org> 
https://lists.amrad.org/mailman/listinfo/tacos

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.amrad.org/pipermail/tacos/attachments/20200313/b91e865a/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 72003 bytes
Desc: not available
URL: <http://lists.amrad.org/pipermail/tacos/attachments/20200313/b91e865a/attachment-0001.jpg>