Making SMD boards - wither paste stencils?

[Tad G]

There are also direct printing systems:
http://www.fullspectrumengineering.com/tutorial.html
http://blog.rhysgoodwin.com/electronics/inkjettoner-hybrid-pcb-printing/

-Tad

----- Original Message -----
From: "Mark Whittington" <markwhi at gmail.com>
To: tacos at amrad.org
Sent: Monday, November 15, 2010 12:00:59 PM
Subject: Making SMD boards - wither paste stencils?


I have been trying to figure out what the coating on the paper is. I've made a dextrin glue that works fairly well (detailed here: http://forums.makezine.com/comments.php?DiscussionID=1825 ) but I'm pretty sure that I'm either missing something or the toner transfer paper is completely different. 
Anyone have any thoughts on this? 



On Mon, Nov 15, 2010 at 10:32 AM, Frank Gentges < fgentges at mindspring.com > wrote: 



We used the special paper we got from Mouser and the backing would loosen up from the toner and just float away. That worked fine. We did not need any touch ups. 



_______________________________________________
Tacos mailing list
Tacos at amrad.org
http://www.amrad.org/mailman/listinfo/tacos