IRLP Repeater test again today?

[wb4jfi at knology.net]

Just after sending this, I tried the link again.  LO and behold, Sandy was there!

So, the IRLP link is working fine!  Hope to see you on the air sometime.
Terry, WB4JFI


From: Terry Fox 
Sent: Friday, November 11, 2011 9:20 AM
To: tacos at amrad.org 
Subject: IRLP Repeater test again today?

I would like to test the IRLP link again sometime today (Friday).  I should be home most of the day, but have some workers here replacing a water heater.

Each time that I activate the link, it only stays up for about ten minutes of inactivity, then times out, so I need to coordinate the “test” time to make sure it is up when the test is being conducted.  

As an alternative, someone in AMRAD can connect the IRLP link to me by touch-toning my IRLP node number, 8568.  That should activate the link if the RF path between the IRLP hardware and AMRAD repeater is good.  Touch-toning 73 will disconnect the link.

thanks.
Terry, WB4JFI



--------------------------------------------------------------------------------
_______________________________________________
Tacos mailing list
Tacos at amrad.org
https://amrad.org/mailman/listinfo/tacos
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://amrad.org/pipermail/tacos/attachments/20111111/229bb6c8/attachment.html>