IRLP Repeater test again today?

[Tom Azlin N4ZPT]

that's great Terry. Yes. I should listen more often to the AMRAD 
repeater. I tend to leave my radio on the Tysons D-STAR repeater since I 
maintain that repeater. 73, tom n4zpt

On 11/11/2011 9:40 AM, wb4jfi at knology.net wrote:
> Just after sending this, I tried the link again.  LO and behold, Sandy was there!
>
> So, the IRLP link is working fine!  Hope to see you on the air sometime.
> Terry, WB4JFI
>
>
> From: Terry Fox
> Sent: Friday, November 11, 2011 9:20 AM
> To: tacos at amrad.org
> Subject: IRLP Repeater test again today?
>
> I would like to test the IRLP link again sometime today (Friday).  I should be home most of the day, but have some workers here replacing a water heater.
>
> Each time that I activate the link, it only stays up for about ten minutes of inactivity, then times out, so I need to coordinate the “test” time to make sure it is up when the test is being conducted.
>
> As an alternative, someone in AMRAD can connect the IRLP link to me by touch-toning my IRLP node number, 8568.  That should activate the link if the RF path between the IRLP hardware and AMRAD repeater is good.  Touch-toning 73 will disconnect the link.
>
> thanks.
> Terry, WB4JFI
>
>
>
> --------------------------------------------------------------------------------
> _______________________________________________
> Tacos mailing list
> Tacos at amrad.org
> https://amrad.org/mailman/listinfo/tacos
>
>
>
>
> _______________________________________________
> Tacos mailing list
> Tacos at amrad.org
> https://amrad.org/mailman/listinfo/tacos